Hole Type Shadowless Lamp in Orthopedics hospital
Hole type shadowless operating lamp
Hole Type Shadowless Lamp data：
|Model||illumination||Color temperature（K)||supply voltage||Rated power||Input power（W）|
1. shadowless lamp connectors should be firmly without loosening, concentrating regulation should be flexible.
2. rotation of the rotation should ask shadowless light, the light body can stably stay at a selected position, in the absence of external forces, should not change the original position.
3. the shadowless lamp operation range should be not less than the specified value, which refers to the range of motion (including the arm tube around the fixed seat rotation to 360 degrees; the lamp body around the pipe rotation to 360 degrees, four hole reaches 180 degrees; Y tube moves up and down to reach 38; U type tube turning around to reach 150 degree. The lamp body revolves around the Y tube with four holes, five holes reach 110 degrees, and the other aperture is required to reach 160 degrees.
The 4. lamp power and energy should be less than the specified value of 15 to 29.
5. mobile mobile shadowless lamp on the flat ground, casters should be light and flexible, there shall be no dumping phenomenon.
The light-emitting surface coating layer 6. common type shadowless lamp reflector is the circle should be bright, no obvious stripes, bump, scratches and mildew phenomenon.
The light-emitting surface coating layer 7. cold type shadowless lamp reflector should be uniform, firm combination, there is no pinhole, water stains, spots and release phenomenon.
Hole Type Shadowless Lamp in factory